3 Day Motor Circuit Analysis Motor Diagnostic Workshop - Level II

Course Type: Public Classroom

Course Number: 10041

Three days of MCA™ (De-Energized) training provides specialized procedures and guidelines for machines not covered in the MCA™ Basic courses, prepares you to troubleshoot transformers, DC motors, wound rotor induction motors, synchronous motors & wind turbines generators. This public course is appropriate for both supervisors and technicians. Course materials include Workbook and Motor Circuit Analysis Manual. Continental breakfast and Lunch are provided each day.

Course Objectives

Upon successful completion of this course students should be able to: 

  • Use the AT5™ for all machine & winding types
  • Determine which function or feature is used to evaluate all machine and winding types
  • Understand how basic electrical principle such as the Lenz Law, Ohms Law, and Faraday’s Law affect MCA™ readings
  • Use the AT5™ to manually measure R, L, Z, Fi and I/F
  • List the different types of Electrical equipment with windings, identify their components and describe the purpose of each component
  • Determine Motor Shaft Speed based on Measured Values of Voltage, Current, Nameplate Speed and Rated Power for AC induction motors
  • List the main types of failures associated with the above electrical equipment
  • Describe the various techniques available to identify electrical failures in the above electrical equipment
  • Explain the various measurements and how to perform MCA™ measurements on the above listed equipment
  • Evaluate all the above listed electrical equipment based on MCA™ measurements
  • Explain the process for correcting MCA™ readings caused by “Rotor Position”
  • Explain the purpose of the ALL-TEST PRO 31™ (AT31™), MOTOR GENIE® and ALL-TEST PRO 5™ (AT5™); and describe their features
  • Obtain data from the above listed equipment with the AT31™ and the AT5™ (on the AUTO and manual modes)
  • Evaluate the condition of an AC Motor based on the measurements taken with the AT31™, MOTOR GENIE®, and AT5™
  • Create your plants machinery hierarchy & learn how to set up routes
  • Demonstrate the ability to upload data stored in the AT5™ onto the MCA™ software and generate a machinery report
  • Explain the 4 Primary Maintenance Philosophies
  • Describe the 3 phases of Predictive Maintenance

Additional Course Information

Technology or Other Requirements: Students attending this course must bring their own laptop. Laptop must have administrative rights to install software. Minimum operating system and software to be installed on the laptop should be Windows XP, with Microsoft Word and Excel 2003. NOTE: WE ARE NOT APPLE or LINUX operating system compatible.

Prerequisites: MCA™ Basic or a previous 3 day MCA™ Course

Format: Blended, Self Paced and Instructor Led Classroom

Assessment Style: Graded Test, Pass/Fail

Cost: $1,930.00 USD, Prices may vary for events held outside the United States and Canada

Duration: 3 Days/21 Instructor Lead Hours, 2 Self Paced Hours

CEU Award: ALL-TEST Pro, LLC is authorized by IACET to offer 2.3 CEUs for this program. As an IACET Accredited Provider, ALL-TEST Pro, LLC offers CEUs for its programs that qualify under the ANSI/IACET Standard.

Instructor: William Kruger